Keystone Pipe Handling Tools
Keystone Drill Pipe Elevators
KET is a leading manufacturer of Drill Pipe Elevators. We design and precision-machine all of our elevators to meet and exceed API Standards (API 8C or API 7K Standards), with KET and the API monogram stamped on our equipment, you can be sure you are getting high-grade equipment at a competitive price, made in the USA.
We understand the critical requirements of the oil and gas industry and the need for high-quality tools and parts. Our elevators include Safety Latch Lock Pins – designed to keep the elevator’s safety latch locked in place, preventing the elevator from being accidentally released
Our equipment is manufactured from quality materials acquired from trusted vendors. *Upon purchase, customers receive proof of load test, MPI, and material and heat-treatment certifications included with their data packets.
See below for KET’s full elevator line.
Square Shoulder Elevators
Keystone A Series Square Shoulder Elevators come in two types, “TMA” 100-ton, and “MRA” 175-ton and cover pipe sizes 2 3/8” – 5 1/2”.
Bottleneck Elevators
Keystone G Series Bottleneck Elevators come in four types, “MG” 100-ton, “RG” 150-ton, “MGG” 250-ton, “GG” 350-ton, and the “HGG” 500-ton and cover pipe sizes from 2 3/8” – 6 5/8”. The “MGG”, “GG”, and “HGG” models can be fitted with a special wear bushing in the bottom to help reduce bore wear when used with Top Drive systems.
Slip Type Elevators
Keystone Y Series Slip Type Elevators come in four types, the 40-ton “MYT”, 75-ton “YT”, 150-ton “HYT”, and the 75-ton “YC”. Tubular sizes covered are from “3/4” – 7”. All slip backs and die slots on Keystone slips are precision machined to insure proper grip and to prevent bottlenecking or slip cuts to the pipe.
(NEW) Slim Hole Slips For Slip Type Elevators
Keystone Y Series Slim Hole Slips come in three types, the 40-ton “SH-MYT”, 75-ton “SH-YT”, 150-ton “SH-HYT”.
Side Door Elevators
Keystone SLX Side Door Elevators are rated at 65, 150, and 250-tons and come in sizes from 4 1/2” – 20”. The ears on the 150 and 250-ton are designed so the elevator can rotate freely in the bails when used for picking up or laying down pipe.
- SLX 65-ton
- SLX 150-ton
- SLX 250-ton
- SLX 350-ton
Single Joint Elevators
The Keystone SJ Series Single Joint Elevator is rated for 7.5 tons. The elevator can be bored to accommodate 18 degree tapered drill-pipe or square-shoulder casing and tubing.
Contact
© Copyright 2022, Keystone Energy Tools LLC. All rights reserved. Designed and Developed by
